At the beginning of the new year, the DD40/2 deep-hole CNC drilling machine independently designed and developed by Faine Company (see Figures 1 and 2) was successfully developed and officially put into production, adding new members to the Fain product family and filling the domestic deep hole CNC drilling machine. The blank of the equipment solves the current situation of total dependence on imports. It is reported that Fain's CNC deep hole drilling machine has been favored since its inception. The first deep hole drill has signed a supply contract with Shanghai Sensong Group.
In March 2004, Fain decided to design and develop a deep-hole CNC drilling machine to provide a suitable and efficient domestic deep hole processing equipment for the processing of thick tube sheets. After more than one year of unremitting efforts of the company's colleagues, the DD40/2 deep hole CNC drilling machine has been successfully developed and put into production smoothly. The first CNC deep hole drilling machine produced by Fain signed a supply contract with Shanghai Sensong Group and has qualified to process a tube sheet for the Sensong Group (see Figure 3). They expressed the performance and processing quality of the equipment. satisfaction. It is understood that "the size of the tube sheet is Ф2100×420mm, which is a composite material consisting of 11mm thick stainless steel and 410mm thick 16Mn material. The two materials use the same spindle speed, but the processing method uses different processing. Specification: When processing stainless steel materials, a small feed rate is used, and the feed rate is automatically increased after drilling, thereby achieving one-time drilling of the composite material."
DD40/2 deep hole CNC drilling machine is mainly used for deep hole drilling process of heat exchange tube sheet in petrochemical, boiler, thermoelectric and other industries. It adopts hard alloy external chip removal gun drill or internal chip removal BTA drilling technology, advanced technology and processing. High precision and stable and reliable quality. The maximum clamping workpiece of the equipment is 4000mm, the maximum workpiece thickness is 750mm, the drilling diameter is Φ7~Φ24mm, the surface roughness of the machined hole is Ra1.6-3.2, the aperture precision is IT9-IT10, the hole roundness is 0.02mm, the machining precision is high and the price is low. It will become the first choice in the field of thick tube sheet processing equipment.
Medical Industry Mass Flow Meter
Sealand is a professional manufacturer of Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter, ATEX, IECEx & CE approved.
There are 2 optical switches for operation. The SET and SELECT optical switches are used to navigate the transmitter display. To activate an optical switch, move your finger 1~2mm over the optical switch close to the glass.
Mark:
1. The display will timeout without any operation in 5 min.
2. During numbers input, the decimal point will come up automatically if the first digit is 0; if not 0, please activate SELECT until decimal point shows up.
The general operation is listed as follows.
|
On Main Interfaces |
Activate SET to alternate mass and volume values. |
|
Activate SELECT to alternate main interfaces. |
|
|
Long activate SELECT to go to Setup Interface. |
|
|
Long activate SET for total reset.
|
|
|
Back to Main Interface |
Long activate SET & SELECT at the same time.
|
|
Select Submenu, Parameters & Numbers |
Activate SELECT to select the submenu, parameters or numbers. |
|
Activate SET to go to submenu or save parameters/numbers. |
|
|
Save setup |
Long activate SET to save the modified setup. |
|
Back or Exit |
Long activate SELECT. |
Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com