Many people are relatively confused in the rough room, do not know how to decorate better, there is no clue. Renovation of the house is a very tedious thing, so everyone in the pre-decoration is best to understand the rough room renovation process, so that you can be more peace of mind in the decoration. Then, Xiaobian will introduce the renovation steps for the rough house .
Blank room renovation process
1, rough room renovation process - property approval and housing design
Before the renovation, you need to go to the property center to go through the relevant decoration procedures, fill in the basic information, the person in charge, and the deposit payment. You must also apply for a community pass to facilitate the entry and exit of the construction party. Then there is the communication with the designer's decoration design. The design completes the corresponding design work according to the owner's needs. After the decoration design is confirmed, the next step is to review the details of the decoration contract with the decoration company. After the contract review is completed, the construction of the contract can be started.
2, rough room renovation process - hydropower reform
The first step in the renovation is the transformation of hydropower, which is one of the most important projects in the renovation project. This part of the construction period can generally be completed in three to seven days, because this project is very important. Even if the owner does not know much about these items when the workers are constructing, they must go to the details of the project. Otherwise, loopholes will be very troublesome.
2, rough room renovation process - bricklayer / carpentry
The order of construction of bricklayers and woodworkers is determined according to the differences in different regions and processes. Waterproofing and grassroots construction will be cross-processed in this process, so the materials needed for waterproofing must be in place. The duration of the bricklayer's time comparison is usually seven to thirty days. Carpenters are now doing less, and its duration is about seven to twenty days. After these two projects are completed, all areas that must be well-accepted must undergo detailed inspections.
3, rough room renovation process - paint
The last item in the renovation is paint. Before the start of the paint, the owner needs to pay the middle-term renovation money according to the contract. Before the paint is purchased, it is necessary to determine which areas need to be painted. Otherwise, it will cause waste on the material. After the project is completed, the construction personnel can leave.
4, blank room renovation process - installation
The next step is to install some accessories, furniture, wardrobes, floors, doors, etc. After the installation is completed, it is to pay all the remaining funds. If the decoration problem later in the period can contact the construction side to warranty.
The article is summarized: On the rough room renovation process Xiaobian introduced to this, and I hope you need help with the decoration. Choose a suitable decoration mode to decorate your own satisfaction. For more information, please continue to follow this site.
Wiper Seals are a type of mechanical seal commonly used to protect piston rods and pistons in hydraulic and pneumatic equipment. The main function of Wiper Seals is to prevent dust, dirt, and other impurities from entering the interior of the equipment, thereby protecting the sealing performance of the piston rod and piston, and extending the service life of the equipment.
Wiper Seals are typically made of elastic materials such as polyurethane, nitrile rubber, fluororubber, etc. These materials have excellent wear resistance and chemical resistance, and can maintain stable performance in various harsh environments.
Wiper Seals are typically divided into two types: unidirectional and bidirectional. Unidirectional Wiper Seals can only prevent dirt and impurities from entering the device from one direction, while bidirectional Wiper Seals can simultaneously prevent dirt and impurities from entering the device from both directions.
Wiper Seals can also be customized according to different application requirements. For example, for high-speed rotating devices, special Wiper Seals can be used to ensure that they do not generate excessive heat and friction during high-speed rotation. For equipment used in harsh environments, special materials such as corrosion-resistant, high-temperature resistant, and low-temperature resistant Wiper Seals can be used.
In summary, Wiper Seals are in dispensable mechanical seals in hydraulic and pneumatic equipment, and their excellent performance and reliable sealing performance provide important guarantees for the normal operation of the equipment. If you need a Wiper Seals product, you can contact a professional seal manufacturer to customize the appropriate Wiper Seals for your device according to your specific needs.
Wiper Ring,Hydraulic Wiper Seal,Double Lipped Wipers,Dust Seals
DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com