Recently, the high-temperature and high-density oil-based drilling fluid independently developed by the Drilling Institute has been successfully applied in the Qiansu 2 well in the Kunlun Mountains of the Tarim Basin, marking the successful replacement of foreign high-temperature and high-density oil-based drilling fluids with foreign technologies.
The pre-knowledge of the location of the Su 2 well is very different from the actual one. It took nearly two years to drill to the depth of 4575 meters in the early stage. In order to ensure the smooth implementation of the drilling of Su 2 well, the drilling institute will provide technical support for on-site construction in real time and organize and manage it by project system. Through the joint efforts of many parties, the Su 2 well drilled to more than 6,000 meters in May this year and successfully drilled, and found a better oil and gas display.
The actual drilling shows that the high temperature and high density oil-based drilling fluid system independently developed by the Drilling Institute has stable performance, strong resistance to salt paste pollution, low fluid loss and high temperature filtration, good mud cake quality, small change of rheological properties of drilling fluid, and demulsification. The voltage is above 1000 volts, and the performance is stable, which effectively solves the problem of instability of the well wall of Su 2 well and the falling, shrinkage and diameter reduction of the target layer. There is no stuck or other accident caused by the drilling fluid, and the high efficiency is guaranteed. The safety implementation of the complex salt paste layer of Su 2 well and deep drilling, coring, electric measurement, casing and cementing completion operations. The unit cost is expected to be 20% to 30% lower than the foreign oil-based drilling fluid system used in the Kuqa Mountain front, and has a broad application prospect in Tarim.
The domestically developed high-temperature resistant high-density oil-based drilling fluid technology was successfully applied in the piedmont area of ​​the Tarim Basin for the first time. Its performance fully meets the requirements of ultra-deep well drilling site construction, and it is a domestically produced high-density and high-density oil-based drilling fluid technology for the Tarim Mountain area. The foundation has been laid.
Concerned about surprises
High Precision Optical Glass Window
Windows are optical glass with ground and polished faces that are relatively parallel.They are used to isolate two physical environments while allowing light to pass.Windows made of BK7 material have high transmission in the visible spectral region, do not scratch easily, do not degrade under normal operating environment and hence do not need any special precaution or treatment. Anti-Reflective Coating will provide higher transmission.
China Star Optics offers all types of windows made from different materials. Such as N-BK7, Fused silica, sapphire,CaF2, Silicon, Borofloat, high borosilicate glass and other optical glass supplied by Schott and Chinese CDGM are available upon request.
Windows at shape of round,quadrate, triangular or other polygonal are also available upon request.In addition, we provide a variety of single layer or multiplayer anti-reflecting coating,HR,PR coatings on Optical Windows.
Specification of our optical windows as follow:
*Material:high borosilicate glass, BK7,UV-grade fused silica (JGS1) or other optical crystals materials
*Length tolerance:+/-0.01
*Width tolerance:+/-0.01
*Center thickness tolerance:0.005mm
*Surface quality:80-50 to 10-5 Scratch/Dig
*Surface flatness:<lambda to lambda/20
*Parallelism<=1min -- 2sec
*Clear Apenture:80% -- 100%
High Precision Optical Glass Window,High Purity Silica Windows,Optical Round Window,Standard Optical Windows
China Star Optics Technology Co.,Ltd. , https://www.realpoooptics.com