In the decoration, most of the floor tiles are floor tiles or wooden floors. There are many types of wood flooring, which have the advantages of wear resistance, noise reduction, etc., and therefore have the potential to become a standard for decoration. However, if the material selection fails and some unnecessary mistakes are made, the floor effect may be discounted. Therefore, it is necessary to understand the suspicions of floor decoration.
First, the floor decoration acceptance error
This misunderstanding usually occurs when the floor covering is checked and accepted. Many consumers are pursuing a better look at the floor, and are often overly pursuing a lack of color difference and texture consistency. They have discovered that subtle defects require replacement or resurfacing, resulting in a waste of human and material resources.
We know that solid wood flooring is a natural wood product. Wood is greatly affected by the environment. The same tree species in different habitats will lead to different wood color. Even the same wood saw cut the board, due to the different position of the saw, different color depth, Different wood textures. Therefore, the solid wood floor objectively has the phenomenon of color difference and pattern unevenness, which is a natural phenomenon.
Second, the floor decoration construction error
In order to better fix the floor during construction, the builders lacking professional knowledge will walk into a common misunderstanding of construction and fix the floor with wooden wedges and nails. The use of wood wedges and iron nails in the construction of solid wood floor construction will cause the nail holding force to be insufficient due to the small contact surface between the wood wedge and the nail, which can easily cause the looseness of the wooden keel, and the noise will appear when treading on the floor.
The fixation of the wooden keel generally chooses the fixing method of the hammer drill. To find a good level of ground, the general hammer into the depth of about 25mm or more, if the use of nail penetration into the concrete through the wooden keel, the depth must be greater than 15mm. If the ground level difference is too large, you can level the screed before fixing the wooden keel.
Third, the floor decoration selection error
The purchase of the floor is very eco-friendly, and some consumers believe that only the solid wood floor is environmentally friendly and the board of the elements must not be painted. After the paint board is painted, the floor is not good or bad. After spending a lot of time personally painting, the result can not only prevent the decoration pollution, the surface of the paint is easy to fall, greatly reducing the life of the floor.
In fact, the best choice when buying paint board. The board is scraped with a layer of putty on the floor surface so that the insect eyes and living quarters on the floor are covered with putty. In addition, the board needs to be painted by itself and there are problems such as pollution and unsatisfied quality of the paint film during the finishing process. The lacquer board is to flatten the floor block and paint directly on the board, so that the defects on the board can be seen at a glance and the paint surface is wear-resistant and durable.
I believe that after reading the three floor renovation described above are easy to make mistakes, then the floor will be more relaxed and paving results will be more assured.
Floor mounting floor
Hollow Valve Balls,Hollow Bronze Ball Valve,Stainless Steel Valve Balls,Stainless Automatic Ball Valve
WENZHOU ZHENHONG VALVE BALL CO., LTD , https://www.zhvalveball.com