In the renovation process, how many problems will be met with this or that problem, such as the uneven seams can be remedied ? This is also a lot of friends in the renovation of the recent response to the problem, then the following small series to say that the floor is not beautiful Is it possible to remedy the seam ? There is the correct operation of the beautiful seam construction, hoping to help everyone.
Is it possible to remedy the uneven seams of the tiles?
Can we remedy the uneven seams of the tiles ? On this issue, let’s take a look at some netizens’ answers to this question.
Netizens 1. The bricks are not flat. It means that when the tiles are not attached, he can use the grout.
Netizen 2. No, the unevenness of the floor tiles is caused by the unevenness of the cement, and the beauty seam can only be filled between two blocks to fill the bricks that cannot affect the whole.
Netizen 3. No, if that is done, the dust in the gaps in the tiles will be poorly cleaned and looked better.
Netizen 4. Can not be solved, but you can beautify the visual effect of the uneven tiles to make it less obvious, and use a kind of floor grout similar to the grout, so that the effect is more consistent, bricks look better.
Feedback from netizens shows that if the bricks are not flat, they can be remedied by US grouts, but this does not completely solve the fundamental problem of unevenness of the tiles. However, compared with other methods, US grouts are used for remedy or remediation. usage instructions.
How to operate the correct seam
1. First of all, for the reserved design of the tile slits, generally the width of the reserved tiles needs to be 1-8 mm wide and 1-2 mm deep. Such a width will be more effective when used to fill in with US grout. , And after the brick seam wide hook three-dimensional and strong sense of hierarchy, but also better control the size of the collection of small errors.
2. Secondly, position the well-prepared tile gap and use a cross to embed it in the tile joints. This will ensure a uniform width, and then you can begin to fill in the US grout. After filling, use the willow to join the seams. Compaction, so that its depth is about 0.5-1.5.
3. Finally, after filling in the US sizing agent, the cement material in the seam is dried thoroughly, and after drying, the dust in the ceramic tile is cleaned with a rag.
It should be noted that when the masking paper is peeled off, it must first be smoothed and peeled off in a timely manner. It must not be torn off too long, or it will even uproot the beauty suture. In addition, once the material is finished, the outlet is sealed with a toothpick or tape, which is to avoid overflow of the USG.
Xiao Bian summed up: can the bricks be repaired by uneven seams ? The answer is yes, but it cannot be solved fundamentally. At the same time, Xiao Bian also shared the construction of the ceramic tile grout. I hope this small editor will introduce the contents of sharing and help everyone.
Led Downlight Emergency Conversion Kit
Led Lamp Emergency Power Supply,Led Battery Ballast ,Led Battery Backup Driver,Led Driver With Battery Backup
Foshan Nai An Lighting Electric Co.,ltd , https://www.twinspotlights.com