Corrugated flame arrester Model: ZGB-1 Caliber: 50-300mm Pressure (MPa): 0.6~5.0 Material: Carbon steel, stainless steel ZGB-1 New corrugated petroleum storage tank flame arrester for pipelines, Class A with flash point below 28 °C , oil, hydrogen liquefaction and kerosene, diesel, stupid, crude oil, etc. with flash point below 60 °C, can be used with breathing valve, can also be used alone, on the inner floating tank snorkel, underground station Oil tank snorkel.
Net type flame arrester
Model: HGS07 caliber: 15-200mm Pressure: 2.5MPa / 4.0MPa Material: carbon steel, stainless steel HGS07 mesh flame arrester is suitable for storing Class A oil with flash point below 28 °C and B with flash point below 28 °C Oil-like products are also suitable for storing materials on a vaulted tank with nitrogen capping. The gravel flame arrester is the same as the mesh type and is used on the pipeline. It can be used together with a breathing valve or a breathing manhole. It can also be used alone.
Drawer type corrugated flame arrester
Model: ZGB-2 caliber: 50-250mm Pressure: Material: carbon steel, stainless steel ZGB-2 (all weather) type drawer type corrugated flame arrester is used to install crude oil, gasoline, kerosene, diesel, aromatics, sulfur and other oils Or fixed-top tanks of other chemical materials, usually used in conjunction with breathing valves. Its main function is to allow the passage of flammable and explosive gases, and to prevent and suffocate the flame that is introduced into the tank. The flame arrester can be matched with the snorkel or used separately, and other specifications can be provided according to user requirements.
Detonation-fired pipe flame arrester
Model: ZGB-1 Caliber: 15-300mm Pressure (MPa): 0.6~5.0 Material: carbon steel, stainless steel pipeline for flammable gas, flare system, oil and gas recovery system, heating furnace fuel gas network tube, air purification System, gas analysis system, coal mine gas emission system, corrosive combustible system
Oxygen pipe flame arrester
Model: FPV-XT, FP-XT caliber: 15-500mm Pressure: 2.5MPa / 4.0MPa Material: stainless steel / copper FP-XT oxygen pipeline flame arrester and FPV-XT oxygen pipeline valve front and rear flame arrester is special Copper alloy and stainless steel are welded. It can effectively prevent the "adiabatic compression" which is easy to form when the oxygen pipeline valve is suddenly opened. The local temperature rises suddenly and becomes the ignition energy; it can prevent the particles of high-speed movement (such as rust, dust, welding) under the pressure difference between the front and the back of the valve. The slag, etc., rubs against the pipe behind the valve, and the spark generates a spark. The use of flame arresters can quickly block the source of fire and prevent the occurrence of explosions in the pipeline.
Natural gas flame arrester
Model: FPB caliber: 15-250mm Pressure: PN16-PN25 Material: carbon steel, stainless steel
Drainboard sinks are sinks that have an attached drainboard usually on one side but sometimes on both sides. This drainboard is grooved and slightly angled down so that water drains directly into the sink while dishes are resting on it. It is a kitchen accessory that helps you to dry your dishes. We also support custom handmade sinks, so sinks can be customized to the size and color you need.
Drainboard Sink,Sink With Drainboard,Kitchen Sink With Drainboard,Double Sink With Drainboard
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.jmmeiao.com