Floor grinder maintenance

Floor grinding machine plays an important role in our industrial production. It is mainly applied to the grinding of the ground. In order to smoother the use of floor grinding machines, we need to pay attention to the following three precautions.

First, depending on the material that needs to be polished, we need to adjust the amount of sanding pressure. For example, the surface of granite and ordinary concrete floors have large differences in hardness. Therefore, we must adjust the grinding pressure according to the material properties. This not only can protect the service life of the machine, but also can reduce the time required for polishing, which is an important step to save manpower and material resources.

Second, different methods are used depending on the method of grinding. According to a salesperson at a floor polishing machine in Tianjin, the main factor that caused the floor grinder to fail was that he did not choose the right grinding method. If you need to grind the surface of the floor, then you must install a dust suction device on the machine, so that it will not cause the crushing of dust and debris and accelerate the loss of equipment parts. In addition, if you want to reduce the wear of the floor grinder, you can also adjust the chassis of the machine according to the size of the grinding area, so that the machine can better fit the objects that need to be ground.

Third, the floor grinder is regularly checked for safety. Any machine and equipment will have large and small problems after being used for a period of time. If the habit of regularly inspecting the grinding machine is not formed, then it is very easy to cause the use of the machine to decrease, and the problem of increasing the machine damage rate arises. The regular inspection of the grinder is not only to better protect the machine, but also to protect the safety of the machine operator.

Magnetic Light Rail

Magnetic Track Lighting is more and more popular on the market.But how to choose the thickness of Magnetic Track Rail?

Must be thick enough.

There are 1.4mm, 1.5mm, 1.6mm, 1.8mm, 2.0mm,2.2mm thickness on the market.Normally 2.0 can be used at ease, is more reliable quality

How to select the copper and plastic conductivity strip in the led magnetic rail?

Use flat pure copper as much as you can

The old products, and we saw most of which is round copper wire, brass containing copper in 59% ~ 68%, and the conductive efficiency is enough. But the circular brass with lamps and lanterns hanging round copper conductive point contact area is lesser, easy to contact but not stable.So sometimes when you move the magnetic track lights and lanterns, there will be a shiny bright, but you don't move the lamps and lanterns, Still can be normal and no problem to use.

Our material is pure purple thickened copper strip, which is more stable to protect the lamp chip power supply.

So ,pls do remember to select the pure flat copper strip when you use magnetic Lighting Track Rail .Don't be cheap for your safety.

OEM magnetic track light 1