The use rate of floor tiles is very high, and the general bathroom is necessary. Some consumers who feel that the wooden floor is in trouble will also change their floor tiles. The floor tile shop pays attention to it. Don't you know it?
Oushenuo Tiles Qianghui Tiles Jinyi Ceramics
Tile selection materials:
The selection of facing bricks should be smooth surface, uniform color, neat edges, complete edges and corners, no damage, and have product certification.
Tile construction:
1) Before the construction of the floor tiles, the floor tiles should be soaked in water, which should be soaked in the next day, and dry to the surface without water stains before paving.
2) Before the construction of the floor tiles, a reference line should be displayed on the floor.
3) When the floor tiles are being constructed, the concrete floor should be moistened with water, coated with cement mortar (including 20% ​​of 107 glue) on the back surface, laid on the basis of the baseline, and the joints should be tightly stitched. After the second time, the line should be checked. Straighten the seams and adjust them instantly. Check them once after each row.
4) The bathroom, kitchen, balcony, floor tile, must be inclined to the floor drain, the slope is controlled at 2% (3mm).
5) The dry shop shall be leveled on the floor according to the horizontal line of the projectile, and the sample shall be placed within two meters, and then the inspection shall be carried out with a two-meter ruler for acceptance. Is the paved material applied with 10:1 yellow sand and cement? Evenly, flattened and compacted.
acceptance:
1) The error within 2 meters shall not be greater than 2mm. The brick joints shall be neat and uniform in size. There shall be no hollowing or loosening. Acceptance shall be carried out with a ruler or ruler with a length of 2 meters.
2) In the acceptance process of the floor tiles, use a hammer to gently tap on the ground, without empty drums.
3) The paved slope with drainage requirements should meet the drainage requirements, and attention should be paid to the tightness of the joint with the floor drain at the time of acceptance.
Links: Paving antique tiles should not be taken lightly
Tiles Floor tiles Tiles Cement Floor tiles Antique floors Antique tiles Bathroom tiles Toilet tiles Floor tiles Tiles Floor tiles Balcony tiles Kitchen tiles
Globe Valves and angle valves are designed for throttling or regulating flow in commercial and industrial applications. Bronze, cast iron, or cast ductile iron materials. Threaded, flanged, or solder end connections.
Angle valves for use in commercial and industrial applications. Typical services include hot and cold water, HVAC, steam, compressed air, gas and other general utility services.
Vacuum angle valve is used for turn on or shut off the airflow in the vacuum pipeline, the applicable media is air and non-corrosive gases.
It has two structures, one is angle type and another is a 3-way type within an ISO-KF or ISO-F various flange end pre-pump port.
a) Small diameter (≤DN50) valve body are precision investment casting.
b) Large diameter (> DN50) valve body are molding shaped seamless steel or steel plate.
c) Bellows sealed structure can withstand 150ºCtemperature, metal sealed structure can withstand 450ºCtemperature.
d) Can install on any position to control the airflow in the vacuum pipeline, as an on-off valve purpose
Angle Valves, Angle Globe Valves, Brass Angle Valve, Zinc Angle Valve
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com