How to fertilize fertilizer in winter

How to make fertiliser fertilizer in winter should do the following: choose a place for fertilizer. It is necessary to choose a region that is close to the faecal source and convenient for transportation. The manure pile is planned to be occupied. The pile of manure is round and the height is about 1.5-1.8 meters. The piled agricultural fertilizer is broken and mixed well.

In winter, it is necessary to increase the amount of hot fertilizer such as livestock manure, so that fermentation can be faster and the quality of fertilizer can be improved. Try to minimize the amount of water and loam to increase the temperature and speed up the fermentation.

At the bottom of the manure pile, a layer of cattle, horse manure or weeds should be laid first, and then various mixed fertilizers should be piled up. If it is cold in winter, if the dung heap is too small, it will be easy to be frozen and not easy to ferment; increase the drying pile to make the heat dissipate slowly and ferment. It is also possible to adopt the method of sealing mud insulation, and to cover some heat preservation such as firewood straw around the manure pile. It is also very advantageous for the farmer to use some methods to cover the manure pile.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Solid Carbide Twist Drill Bit With Coolant Hole

Solid Carbide Milling Cutter CNC End Mill Cutting Tools


Model Number:Standard Size
Type:Twist Drill Bit

Use:Metal Drilling
Finish:Other
Product Name: High Quality Solid Carbide Twist Drill Bit With Coolant Hole
Precision:High Precision
HRC:HRC55
MOQ:5 Piece
Machine Type:Milling Machine
Point Angle:140 Degree
Controlling Mode:CNC
Delivery Time:10-15 Days
Coating:TiAlN/AlTiN
Suitable for:Coper.Cast Iron.Carbon Steel.Mould Steel
Certification:GS

Product name: solid carbide drill bits
Flute:1.0~20.00mm
Flute Length:28~101mm
Shank Diameter: 4~20mm
Total Length:66~153mm
Material: solid carbide
application: CNC Machining center/drill machine

Carbide end mill cutters advantage:
1. 100% Virgin raw material
2. With production experience over 10 years
3. Advanced production equipment

4. The cutter is a tool equipment with a stronger hardness and longer-life to use which is widely used in the line of machinery like the CNC lathe,has a quite strong hardness to work and it can speed the application of machinery and enhance the efficiency.




Twist Drill Bit With Coolant Hole,Internal Cold Solid Carbide Twist Drill Bit,solid drill internal cold drill

Changzhou Bomitools Co.,Ltd. , https://www.bomitools.com