How to germination of celery seeds during the hot season:
The suitable temperature for germination of celery seeds is 15-25 ° C. When it exceeds 30 ° C, it is difficult to emerge. Seeds can be treated in two ways to promote their germination.
1. High temperature treatment: After drying the seeds for 8-10 days before sowing, soak them in cold water for 24 hours, and change the water every 8 hours or so. Rinse the seeds, then rinse the seeds with water and rinse off the impurities until the water is clear. Wrap the above seeds in gauze and squeeze off some of the water. Put it in the refrigerator and keep the temperature at around 5 °C. Rinse the seeds once a day with water every morning and evening. After 2 days, dry the seeds in a light environment. Rinse twice with cold water every day. After each rinse, use the electric fan to align the seeds for 5-10 minutes. Blow off too much water on the seeds to prevent excessive water, causing insufficient oxygen and affecting germination. It usually takes 5-6 days to germinate.
2, cool treatment: the seeds that have been soaked according to the first method are wrapped in gauze, squeezed, wrapped, and then hung in the deep well 40-50 cm from the water surface, taken out twice a day with water, rinsed The moisture on the surface of the seed should be blown dry with a fan to increase the oxygen around the seed and then wrapped in the well. In this way, after 6-8 days of treatment, it can be germinated and sowed. Seeding with new high-fat membrane before sowing, can keep warm, moisturize, and swell, improve seed germination rate, and make seedlings strong. Repel underground pests and isolate viral infections. It can also be mixed with a seed coating.
The 650W 800W Jig Saw is used for Cutting Wood, Plastic Tube, Aluminum Bar, with 6 speed, 4 Pendulum Settings, Bevel Cutting 45°,Laser Function.
No burrs with good blade.
Jigsaw is the wood working power tools, Perfect for cutting curve, hole digging,can cut 3cm circle.
Portable Jigsaw With variable speed, 0-3000rpm, for different material cutting.
The Jigsaw with 20mm stoke, T-shank Blade.
The 800W Jigsaw can cutting Capacity: Wood:80mm, steel:10mm
The Jig Saw with 4 Pendulum, 0 setting for metal, 1 setting for wood, 2-3 setting for soft wood.
Jig Saw with Normal clamp chuck,Iron base.
Hand Jig Saw with a counterbalanced low-vibration plunge mechanism
Power Saw With a dust blower for max cut -line visibility.
Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
The Jig Saw is equipped with Guide ruler, to control the cutting width.
Built-in Laser Function, for better cutting line ability.
CE/GS/EMC/ROHS certificate.
Electric Jig Saw Jigsaw,Electric Jigsaw,Power Jigsaws,Electric Jig Saws,Cordless Electric Jig Saw
Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com