Nowadays, many families will do some glass partition decoration indoors, and the function of the partition in the decoration is not only the method of making a wall, but also the glass partition. Now the glass partition has been developed very popular, but you Do you understand the related matters of glass partition decoration ? So today Xiaobian talks about the information about the glass partition decoration, I hope to be helpful to everyone~
First, the first position of the line: first is to decide where to install the glass partition, then draw the line on the ground, draw the position line, and then use the vertical line method to pop the position and height line on the wall or column, if there is The frame glass is cut off, and the position of the vertical interval and the fixed point is also marked.
Second, the building materials are cut: When the glass partition is cut, it is necessary to check the size of the site repeatedly, so as to ensure that the installation will not go wrong, the critical dimensions must be measured to ensure the position is accurate when installing the connection. The incision is smooth and tidy.
Third, the installation frame: There are two ways to combine the glass wall frame, one is that the partition wall area is small, this one is now assembled on the flat ground, and then the whole installation is fixed. The second type is a relatively large partition wall. This partition wall must be built directly along the ground and along the top. At this time, it is necessary to install from one end of the shelf. If the frame of the glass partition is an outer veneer, the frame should be installed according to the position that has been found. The metal expansion bolt must be welded firmly after the inspection, and the steel material must be pre-treated before installation.
Fourth, the use of glass partition decoration: after the completion of the glass partition, do not always bear the weight, rely on, and usually pay attention to clean when used, glass partition has a biggest advantage is good-looking, transparent, so if you do not pay attention to clean then reflect This advantage is not available, so pay attention to cleaning.
Fifth, we must pay attention to the rational layout of strong and weak power engineering: reserve reserved switches for strong and weak electricity, sockets and various lines in advance, it is best to have a professional qualified wiring company to conduct on-site actual measurement. And reflected in the drawings, after the soft property company has passed the examination and approval, the line distribution of the glass partition wall is reserved according to the schematic diagram of the integrated wiring system of the drawing.
The above is the detailed answer to the small glass partition decoration. I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the glass partition decoration, please continue to pay attention to us. The decoration of the encyclopedia section!
Electric Fireplace,Electric Fireplace Indoor,Decorative Electric Fireplace,Vertical Wall Electric Fireplace
JINAN LODOR CNC EQUIPMENT CO.,LTD , https://www.zgfireplace.com