Home>Bearing knowledge>How to install the thrust (positioning) bearing? |
How to install the thrust (positioning) bearing?
Source: China Bearing Network Time: 2014-07-31
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The thrust bearing has four-point angle ball bearings, double-row (single-row) angle-angle ball bearings; two-way thrust cone and cylindrical roller bearings; and has also developed brake roller bearing radial bearings.
Four-point angle ball bearings and double (single) row-angle touch ball bearings are used as thrust bearings; the bearings are forbidden in the radial direction; therefore, the inner holes of the bearing housing correspond to the parts of these bearings; the diameter is necessary to be outside the bearing. The diameter is about 0.5 mm or the diameter of the roller is less than about 0.5 mm of the inner diameter of the bearing.
For four-point ball bearings; do not exchange the same type of ring when the device is installed to prevent changes in the axial clearance at the factory.
Two-way thrust tapered roller or two-way thrust cylindrical roller bearing spacer circle; the same type of bearing must not be exchanged; to prevent changes in the axial clearance when leaving the factory.
It is necessary to press the end device of the inner ring of the thrust bearing; and the axial direction should be locked to prevent its relative transformation on the roll neck; the wear and burn of the roll neck cooperation surface are formed.
The axial force bearing of the brake roller is axially positioned through two bearing housings; and the axial clearance is adjusted. When the bearing housing is installed; the inner and outer rings of the bearing should be tightly attached to the inner and outer rings of the main bearing. When the frame is axially fixed to the two bearing housings; care should be taken to eliminate the axial movement of the bearing housing to the axial end in the process of introducing the two bearing housings into the frame.
Recommend to friends comments close window
Bearing related knowledge |
How to distinguish the terminology of NTN bearing radial bearing through sound The correctness of the NSK imported bearing device affects the function and life of the bearing: the device method of the bearing box and the order of the procedures for selecting the bearing |
This article links to http://
Please indicate the bearing network http://
Previous:What are the characteristics of the bearing, bearing seal and dust cover of imported bearings?
Next: Detailed analysis: How to extend the "bearing life"
Barrel Sauna
Barrel Sauna
Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.infinityedgehottub.com