Multi Purpose Anti Rust Spray Lubricant /450ml

  • Model NO.: TE-60
  • Source: Liquid Mineral Lubricants
  • Property: Protective Lubricant
  • Application: Industrial Lubricant, Automotive Lubricant, Marine
  • Validity: Three Years
  • Trademark: TEKORO
  • Specification: CE, RoHS, SGS, GMP
  • HS Code: 340399000
  • Type: Greases
  • Composition: Additives
  • Shape: Aerosol
  • Volume: 450ml
  • Package: 12PCS/CTN
  • Transport Package: 12PCS/CTN
  • Origin: Guangdong, China
TEKORO Spray Lubricant & Penetrating Oil is a multipurpose lubricant and penetrating oil. Provides lubrication, corrosion prevention, and loosens rust. Suitable as short term storage protector for metal parts and equipment.

FEATURES & BENEFITS:
- Cleans, lubricates, penetrates and loosens Stops squeaks
- Displaces moisture
- Corrosion protection
- Rust protection

DESCRIPTION:
TEKORO MULTI-PURPOSE PENETRATING LUBRICANT is a superior, all purpose penetrating lube that displaces water and provides excellent rust and corrosion protection. It is useful wherever a penetrating lubricant is required. It quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts. Formula designed for general or all-around use.

DIRECTIONS:
- Shake well before using.
- Hold can in an upright position.
- Spray on to surface from a distance of 20-30 cm (8" - 12"). Use extension tube for hard -
To reach areas.
- Allow 2 to 3 minutes to penetrate area or part.
- Gently tap the part to accelerate the penetrating action.
 
Volume Pack Qty Carton Specs. Carton Dimension (estimated) Container Qty (cartons)
L(cm) W(cm) H(cm) 20FT' 40HQ
250ml 24pcs/ctn Kraft paper 33 22 17 2500 5600
400ml 12pcs/ctn Kraft paper 27.5 20.5 20.5 2500 5600
650ml 12pcs/ctn Kraft paper 27.5 20.5 29 1816 3294


CONTACT:
We will reply your email or fax within 24 hours
You can call us at any time if there is any question on our production.


Multi Purpose Anti Rust Spray Lubricant /450ml

Sds Drill Bits

SDS Plus and SDS Max drill bits can be used for drilling operations in concrete, reinforced concrete, granite and similar materials. SDS-Plus has a drilling diameter of 4mm to 32mm and a drilling depth of 110mm to 1000mm; SDS-Max has a drilling diameter of 12mm to 52mm and a drilling depth of up to 1200mm.

SDS Drill Bits are available with two (properly shaped integral straight edges), three (star arrangement) or four (integral cross arrangement) inserts, made of cemented carbide. They are deeply embedded in the steel head with industrial solder and are characterized by a high degree of mechanical and heat resistance.

SDS Plus and SDS Max Bits should not only be selected based on the diameter of the drilled hole, but also their depth standard. Both of these measures are necessary to maximize productivity.

Sds Drill Bits,High Carbon Steel Drill Bits,Concrete Drill Bit,Flat Hammer Drill Bits

Danyang Yongshun Tools Co.,Ltd , https://www.ysdrillbitset.com