Pump cavitation overview

Cavitation occurs frequently in both fluid and hydraulic machinery, and cavitation occurs from the blood flow to the turbine and the ship's propeller. Basic Process When the local flow pressure in the runner drops below a certain limit (the current use of vaporization pressure), cavitation occurs in the liquid flow and these gas-filled or vapor-filled cavities rapidly expand, expand and prevail to high The pressure zone quickly condensed, collapse. At the same time accompanied by noise, vibration and even the erosion of the flow channel of the entire process known as cavitation phenomenon. If there is no cavitating nucleus in the liquid, the liquid can withstand a tension of 15000 atmospheres without cavitation. But in fact the water is not pure. Cavitation after birth, first with the pressure to reduce the expansion, into the high-pressure zone after 2-3 shrinkage - rebound expansion, cavitation, depression, the final liquid in the form of jet penetration of the bubble. Impact velocity of micro jet may exceed 1000m / s. Bubble life cycle of about 0.003s. Bubble rupture accompanied by high temperature and pressure and other complex phenomena. Bubbles around the liquid temperature can be as high as 500-800 ℃. Pressure up to 10,000 atmospheres. At the same time, there is a kind of "sonic light".

Injection Nozzle

As the demand to control diesel engine emission increase, the in-cylinder optimisation technology is not satisfied with the standard request; In order to achieve the standard IV or higher standard level, it need to use SCR technology, SCR is mainly technology to reduce the emission of diesel engine emission.

Zhejiang Ailipu Tsingtech Exhaust Purification Technology Co.,Ltd is focus on innovation.production and sales of SCR equipment. during years, they developed general 1 and 2 air-assisted AdBlue Dosing pump and Injection Nozzle, general 1 non-air assisted AdBlue Dosing pump and Injection Nozzle

Air-assisted injection nozzle, which is mechanical straight through module, it is a robust component that injection atomised urea and air mixture in the centre of the exhaust gas flow.

Injection Nozzle,Air-Assisted Injection Module,Scr System,Scr Equipment,Diesel Engine Or Gas Engine,Adblue Injection

Zhejiang Ailipu Technology Co., LTD. , https://www.alipu.com