Pump troubleshooting

(1) no water or no water, mostly due to the end of the valve stuck, partial fouling of water; absorbent height is too high or suction pipe leaks; and Impeller tract infarction, etc. should be identified to take the appropriate method of treatment. Tips: Installation and troubleshooting of agricultural pumps (2) pipeline leaks or leaks, the bolts can not be tightened device. If the leakage is not serious, in the center of leaking or leaking paint grout, and tighten the nut with a wrench; if serious water leakage, we must reload. (3) water pump violent vibration, can be uneven in the electric rotor, shaft coupling may be bad, bearing wear and bending; can also be caused by rotating parts slack, rupture and pipe support is not strong and so on. Should be adjusted depending on the situation to stop, strengthen, straighten or change.

Screen Area Sump Pump

Product Introduction:

The MV/MVR heavy duty Sump Pump is designed for applications requiring greater reliability and durability. The bearing assembly allows the pump to operate in the "snore" condition without damage to the bearings. It is designed for handling abrasive slurries and corrosive fluids by using either elastomer or alloy lined wet ends components. The pump is suitable for mining, chemical treatment, waste water treatment, gravel and general process application. Our MV pump is including Vertical Slurry Pump, Flotation Sump Pump, Screen Area Sump Pump.

Product Features:
-Fully elastomer lined or hard metal fitted
-Double suction semi-open impeller
-No submerged bearing or packing
-Optional recessed impeller and suction agitator available
-MVR models feature full rubber covering for corrosion resistance
-Can be run in insufficient suction duties

Application Range:

Size: 40 to 250mm
Capacity: 17 to 1000 m3/h
Maximum head: 40m

Vertical Sump Pump,Screen Area Sump Pump,High Chrome Pumps,Mining Used Pump

SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com