Pure line vacuum pump system improvement

During the filling process of beer, the bottle needs to be evacuated before the filling process, in particular, the production of pure draft beer requires a higher vacuum. Our factory pure raw line wine machine vacuum pump system consists of 6 sets of SIHI coaxial coaxial vacuum pump in parallel, each power 4Kw, in the production process, the start of 6 pumps using incremental (one by one start) , So the technical requirements of six pumps are required, the pump group to normal operation. Vacuum pump group since 2001 frequent failures, often lack of vacuum, vacuum pump motor trip and so on. As of August 2002, 9 pumps (over 40,000 yuan / set) and 8 sets of machinery parts (including pump leaves, distribution plates and mechanical seals, valued at more than 20,000 yuan / set) have been purchased, Shaft repair many times; the degree of vacuum is only -0.06Mpa, can not meet the -0.085Mpa production requirements, seriously affecting the beer quality and production efficiency. After a careful analysis and demonstration, the switch to a 2BE1 series water ring vacuum pump (power 18Kw, pumping rate of 600m3 / h, to replace the original vacuum pump group, and install vacuum protection, water protection, anti-cavitation devices and sections Water device to ensure that the vacuum pump is efficient, energy-saving, long-term reliable operation.In order to prevent the backflow of air and working fluid to the vacuum pump system due to sudden shutdown, etc., installed in the intake pipe check valve.After the improved vacuum pump system put into production, not Failure occurs, the degree of vacuum maintained at 0.084-0.092Mpa. Vacuum pump water consumption and power consumption has dropped significantly.

ISO1127 Sanitary Pipe Fittings

Kaysen Steel is a China manufacturer, supplier and exporter for Stainless Steel Sanitary Pipe Fittings, ISO1127 Sanitary Pipe Fittings, ISO1127 Hygienic Fittings, ISO1127 food grade fittings with Welded, Tri-Clamped, Threaded ends, in 3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH standard, SS304 & SS316L material, which is used in Food, milk, beer, brewage, pharmacy, comestic, biopharmacy, etc. Welcome to buy ISO1127 sanitary pipe fittings, ISO1127 Hygienic Fittings, ISO1127 food grade fittings from us in most favorable price, any questions or requests, pls feel free to contact us!

ISO1127 Sanitary Pipe Fitting Specification:
â–ª Standard:3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH, etc
â–ª Material: Stainless Steel 304 (1.4301), Stainless Steel 316L(1.4404) etc.
▪ Size Range: 1/2″ to 12″ / DN15 ~ DN300
â–ª Connection Type: Welded, Tri-Clamped, Threaded

Surface Finish:
Mechanically polished and electropolished are available for our products.
Tube and Fittings: Ra0.4, Ra0.6, Ra0.8 or specified

Quality & Inspection:
â–ª PMI test to verify material grade
â–ª Dimension controlling during fabricating and finished
â–ª Visual and surface 100% examination before shipment
â–ª Packed in carton box firstly, then in wooden case

ISO1127 Sanitary Pipe Fittings,ISO1127 Sanitary Fittings,ISO1127 Hygienic Fittings,ISO1127 Fittings

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com