2. Excellent lubrication performance and wide adaptability
The Hocut795 series does not contain any Cl and S additives. It is specially lubricated with a special lubricating grease. The lubrication is stable and reliable, and its adsorption changes due to different processing pressures. The lubrication function is correspondingly played according to the specific operation process. Therefore, it has the versatility of use and can adapt to many different processing processes. A comparison of the surface finish roughness before and after the Hocut 795 series and the residual dirt on the workpiece surface are shown in Fig. 1 and Fig. 2.
Figure 1 Comparison of surface finish roughness before and after using the Hocut 795 series
Figure 2 Comparison of residual dirt on the surface of the workpiece before and after using the Hocut 795 series
3. Low foam-free, strong resistance to miscellaneous oil
The characteristics of the surfactant component are the key to the product's ability to foam or resist oil. On the one hand, the Hocut795 series is also low in non-foam in soft water, and on the other hand, it is quite resistant to hard water, that is, no oil precipitation occurs in hard water of 1000 ppm (mg/l). In addition, the Hocut 795 series emulsion itself is well emulsified and stable for a long period of time, but it does not emulsify the hydraulic oil and lubricating oil that leaks into it, and has strong resistance to miscellaneous oil.
Previous page next page
Hand-held Pneumatic/Eleetric Tools
CHANGZHOU ANTALYA TOOL AND MACHINERY CO., LTD. , https://www.atly-tool.com