1-Contemporary designs, beautiful visual impact, perfect user experience.
2-Copper content 59-60%, ensure the best quality. High standard and high quality.
3-We offer warranty 5 years and provide full-life service.Â
| Name | Brass basin faucet |
| Material | Brass 59% |
| Installation | Deck mounted |
| Warranty | 5 Years |
About us.
Guangzhou Luansheng sanitary ware Co., Ltd, located in Kaiping, Guangdong, we focus on good quality and insist on our own designs.
We do believe that only good quality can bring the lasting cooperation.
If you also appreciate good quality products, We think you found the right one.
About Shipping.
We will recommend the shipping method according to the amount products.Â
Â
Aluminium DC Plate=Aluminium direct chill semi-continuous casting. This process involves pouring molten aluminum into a mold; once the metal cools and hardens, it forms a large solid block called a sheet ingot. The size of the sheet ingot depends on the size of the DC unit available and is related to the hot rolling mill capacity and, to some extent, the alloys being cast.
As the metal flows into the molds, it is chilled by jets of cool water pumped around and through the base of the mold. The ingot solidifies gradually during the casting process, which takes approximately three hours. We continuously monitor temperature, speed and water flow so that each sheet ingot is of the highest quality. Individual ingots can weigh up to 20 tons and can be 500 – 600 mm thick, two meters wide and eight meters long. A finished 18-ton ingot contains a volume of source aluminum equivalent to approximately one million beverage cans.
In this process, critical variables such as temperature, speed and water flow are carefully managed, and the metal's chemical composition and cleanliness tested on each cast.
DC ( hot rolling) Plate and coils
Dc Plate for Decorative, Mould Plate, Dc Aluminium Plate
Hongkong NanJie Resources Co.,Ltd , http://www.aluminium-nanjie.com