Sumitomo cycloid reducer introduction

The total transmission of the cycloid reducer can be divided into three parts: the input part, the deceleration part and the output part. A double eccentric sleeve with a 180° misalignment is mounted on the input shaft, and two roller bearings called a jib are mounted on the eccentric sleeve. The central hole of the H mechanism and the two cycloidal wheels is an eccentric sleeve. The raceway of the bearing, and the cycloidal wheel and the needle gear are engaged with a set of annularly arranged pin teeth to form an internal meshing speed reduction mechanism with a tooth difference of one tooth (for reducing friction, the reducer with a small speed ratio) In the middle, there are needle sleeves on the needle teeth). When the input shaft rotates with the eccentric sleeve for one week, the movement of the cycloidal wheel becomes a plane motion with both revolution and rotation due to the characteristics of the tooth profile curve on the cycloidal wheel and the pin gear limitation on the needle gear. When the input shaft rotates positively, the eccentric sleeve also rotates for one week. The cycloidal wheel rotates one tooth to the opposite target to obtain the deceleration, and then the W output mechanism is used to transmit the low speed rotation of the cycloidal wheel through the pin shaft to the output shaft. This results in a lower output speed.

With more & more requests from the modern buildings & decorations, we also have quite a lot of Glass Hardware products available in our hardware range, such as Shower Hinges, Glass Clips, Spider fittings, Pool Fence, Shower Rods, Glass door knob, etc. Due to the rough competition nowadays, customers are tendering to changing ordering glass hinge and glass clip, from now to be stainless steel and zinc alloy raw materials. Moreover, some clients are winning the competition from making these products by the method of welded stainless not casting, which can be lower down the product costs. Product thickness is also something to make the product more cheaper. In order to get acclimatized to the market changes & developments, basing on the original high quality glass hardware products, we also manufacture some of these products with low production cost.
Should you have any further demands, please feel free to contact us any time. And welcome for OEM products with detailed technical drawings.

Glass Hardware

Brass Glass Door,Hinges For Shower Rooms,Hinges For Bathrooms,Stainless Steel Glass Door

Greatwall Hardware International Limited , http://www.greatwall-hardware.com