The houses we just purchased are usually rough houses, and the rough houses need us to be renovated. Some people will install them because of limited economic conditions. Maybe it is to decorate the wall or the floor and install the door. So what are the methods for the roughing of the rough house? What are the precautions for the roughing of the rough house? If you need to know, just take a look at the small series of the decoration home network.
First, the rough room method
1. If you putty, please choose water-resistant putty. Before flattening the putty, measure the flatness of the wall (using a ruler of 2 m or more) to determine the method of scraping the putty. Generally, the wall surface can be scraped with 2 layers of putty, which can both level and cover the background color. Putty with poor flatness needs to be scraped several times in the local area. If the flatness is extremely poor and the wall is tilted seriously, consider scraping the plaster for leveling first, then scraping the putty.
2. Thoroughly check whether the cement wall that needs to be painted in the rough room is solid and flat. If the plastering layer on the wall is not strong enough or there are large cracks and holes, it is recommended to complain to the developer or property and ask them to redo. Individual holes can be filled with plaster if they are repaired by themselves. Putty wall. Be sure to check if the wall putty is a qualified water-resistant putty. If not, you must remove the heavy-duty water-resistant putty. The putty that splashes water on the wall and the fingers can be buckled is a non-water-resistant putty.
3. Advanced sealing method, the cost is high, there is no need to do the general wall. However, for insulated walls, loose walls, and cracked walls, the effect is more obvious and should be considered. If it has been applied (kraft paper), there is no need to make a curing agent, and the functions of the two have already coincided.
Second, the rough outline of the rough room
1. Concealed decoration is very important, and the rough house is not done. If it is not done well, the consequences will be very serious, and now how many square meters to calculate the price, is a big head in the simple decoration.
2. Bathroom ventilation: vents should be left under the ceiling. When staying on the ceiling, use a hand lamp to check whether it is installable, and use the upper method to measure the pumping force. Check the presence of construction waste in the flue and vents by hand.
3. The switch inside the switch box should be installed firmly. Each should be shaken and checked with force. If it is loose, it should be tightened or replaced. Otherwise, there will be more danger when there is a bad contact spark in use in the future.
4. After the rough house is delivered to the house, the wall is just cement. It is also necessary to lay some latex paint or wallpaper, etc. Some parts may need to be suspended, and cover the beam to make the interior look more beautiful. These are expensive.
There are many ways to decorate a house. Nowadays, people will choose the simple ones. What are the main methods of home improvement and the home improvement? The introduction of the above small series also understands these issues. If you still want to To understand more information about decoration, please continue to pay attention to the decoration home Internet cafe.
More related wonderful reading:
How much can be used to decorate the rough room?
Briefing method of rough house
How much is the rough room? Precautions for rough room?
How much is the rough room? How to decorate the rough room?
Rough house decoration steps, rough room decoration, precautions
Bedroom Products,Dressing Chair,Luxury Bed Visionnaire Design,Beds By Visionnaire