Technical characteristics of dedicated network cameras for vehicle management :
1. Integrated video, image capture, H.264 image processing in one, through the TCP / IP network to transfer high-quality digital signals, the image is clear and stable, no video cable, image decompression card, saving wiring costs.
2. Automatic aperture, automatic fill light, automatically adapt to light changes.
3. High-speed shutter to avoid image ghost caused by excessive speed.
4. Strong light suppression camera, anti-lights strong light interference, clear pictures.
5. Anti-rain, sealed dust, high temperature exposure, low temperature automatic heating.
Precautions:
1. Do not arbitrarily replace the power supply.
2. During the installation, please turn off the power of all related equipment.
3. Check the power supply voltage to prevent equipment damage due to voltage mismatch.
4. Carefully check that the input and output interfaces are connected correctly before powering on to avoid damage to the device.
5. When the distance between the power supply and the equipment is less than 10 meters, the power cord diameter must not be less than 1 square millimeter. When the distance between the power supply and the equipment is 10 meters, the 15V power supply should be used, or only 2 square millimeters or more of the power cord.
1. Integrated video, image capture, H.264 image processing in one, through the TCP / IP network to transfer high-quality digital signals, the image is clear and stable, no video cable, image decompression card, saving wiring costs.
2. Automatic aperture, automatic fill light, automatically adapt to light changes.
3. High-speed shutter to avoid image ghost caused by excessive speed.
4. Strong light suppression camera, anti-lights strong light interference, clear pictures.
5. Anti-rain, sealed dust, high temperature exposure, low temperature automatic heating.
Precautions:
1. Do not arbitrarily replace the power supply.
2. During the installation, please turn off the power of all related equipment.
3. Check the power supply voltage to prevent equipment damage due to voltage mismatch.
4. Carefully check that the input and output interfaces are connected correctly before powering on to avoid damage to the device.
5. When the distance between the power supply and the equipment is less than 10 meters, the power cord diameter must not be less than 1 square millimeter. When the distance between the power supply and the equipment is 10 meters, the 15V power supply should be used, or only 2 square millimeters or more of the power cord.
Corrugated Sheet Forming Machine
Roll Forming,Roll Forming Machine,Roll Forming Machinery
Professional Roll Forming Machine Co., Ltd. , http://www.lnformingmachine.com