The wardrobe is indispensable in the design of the bedroom. It not only provides convenience for life, but also improves the quality and taste of the home life. The most important thing to choose a wardrobe is to look at the board. The following experience will teach you a few tricks to buy a wardrobe and pay attention to the details.
Detail 1: Profile
There are two types of practical profile substrates: one is aluminum alloy and the other is plastic steel. Due to its light weight and high strength, aluminum alloy is a high-grade material for sliding door substrates. Has gradually replaced plastic steel products. The aluminum alloy itself is divided into ordinary aluminum-magnesium alloy and smaller aluminum-magnesium alloy for special aviation. Due to the higher strength and lower weight of the aluminum-magnesium-titanium-silicon alloy. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at the profile, not only pay attention to the substrate, but also observe its surface treatment. Advanced surface treatments include anodizing, electrophoretic coating, carbon coating, etc. These processes have higher hardness and aesthetics than simple spraying and plating. The electrophoretic coating film used by American KD has a film thickness of 20 microns and the adhesion reaches the international highest standard of 0, which has unparalleled scratch resistance.
Detail 2: top and bottom rail
At the time, try to choose the top and bottom rails with the same material as one material, so that the top bottom rail is the load-bearing part. To withstand repeated friction, the top and bottom rails must have high strength and wear resistance. The top and bottom rails are made of aluminum-magnesium-titanium-silicon alloy with higher strength, strong resistance to deformation and longer service life.
Detail three: top bottom wheel
The top and bottom wheels are important accessories for sliding doors. It is necessary to pay attention to the selection of high-quality bearing pulleys. The outer part of the bottom wheel is made of FRP material, which has the characteristics of high strength, wear resistance and low noise. Using push-pull more than 100,000 times, the wheel body is treated with three-degree polishing and plating, never rusting.
Editor in charge: Shanghai Furniture Net
cnc machine for steel plate is used for punching, drilling, tapping on big size steel plate.
There are three kinds of machines,
one is Gantry Type Plate Drilling Machine is used for drilling holes on steel plate, max.thickness is 300mm.
second is gantry type plate drilling tapping machine, which can do tapping job on steel plate.
third is high speed gantry type plate drilling machine, the max, drilling speed can up to 6000rpm.
CNC Machine For Tube Sheets,Machinery CNC Metal Tube Sheet,CNC Metal Laser Cutting Machine,Metal Tube Plasma Cutting Machine
Shandong EN FIN CNC Machinery Co., Ltd , https://www.shuofangcn.com