With the increase in the number of home renovations, more and more floor tiles are on the market. Anti-static floor tiles are one of the most popular floor tiles. They can dissipate the charge on the ground and produce anti-static electricity. Today Xiao Bian will introduce to you the types of anti-static floor tiles and the laying process.
What kinds of anti-static floor tiles
Anti-static ceramic floor tiles
This type of anti-static floor tile not only has good heat resistance, abrasion resistance, dirt resistance, and flame resistance, but also has a certain anti-aging function, and the service life is longer than other types of anti-static floor tiles . Moreover, its material does not contain radioactive elements, consumers use it more safely and confidently, and can be used together with caulking agent to achieve a high level of clean environment standards. However, the production process is more complicated and there are fewer floor tiles in the market.
2. Anti-static PVC floor
In the house renovation, the laying requirements of such anti-static floor tiles are relatively simple, so the installation progress is faster than other types of floor tiles, and has a more stable anti-static effect, and is not easily interfered by other external factors. However, it is easy to produce stains, is not easy to clean, and has a short service life and is prone to aging.
3. Anti-static floor
Such anti-static floor tiles are not only wear-resistant, pressure-resistant, and alkali-resistant, but also have good impact and moisture resistance. At the same time, the surface looks smooth and flat and beautiful. However, compared with wear-resistant floors, the service life of anti-static floor will be shorter. At the same time, the color of floor tiles is not as good as that of epoxy floor, and will be even lighter.
How to lay anti-static floor tiles
1. Before laying anti-static floor tiles, carefully inspect the floor and walls to see if they meet the construction standards. If it is found that the ground is uneven or the verticality of the wall is not enough, it needs to be repaired and modified to meet the construction standards.
2. Advance the actual installation height of the anti-static floor tile with the ink line to the wall. Make a horizontal line and make a mark. Then, when laying each piece of anti-static floor tiles, they should be kept in the same level, so as to ensure that the distance difference of each floor tile in the vertical direction will not exceed the specified error range.
3. Measure the length and width of the room, select a reference position, and pop up the grid of the mounting bracket on the ground so that when the floor tiles are laid, it is not easy to produce deviations, which ensures the orderliness of the tiles.
4. Place the mounting bracket at the intersection of the grid lines and adjust it to a suitable height. At the same time, place the anti-static floor tile on the bracket using the suction plate to start laying. Pay attention to laying the floor tiles while laying, and clean them while avoiding the debris below the floor tiles.
Xiaobian conclusion: The above is Xiaobian's introduction to the types of anti-static floor tiles and the method of laying anti-static floor tiles . I hope to be helpful to friends who are interested in this area. Want to know or consult more home improvement issues? Welcome attention This site!
Globe Valves,Stainless Steel Threaded Globe Valves,Npt Threaded Globe Valve,Bspt Threaded Globe Valve
ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztpipevalve.com