The partition wall keel, in fact, is a partition wall light steel keel, which is widely used in daily life. So, do you know how thick the thickness of the light steel partition wall is? How about the price of light steel partition keel? When you buy the light steel partition keel, you must have a general understanding of it to choose.
What is the thickness of the keel steel wall?
1. Light steel keel, decorated with lightweight panels for the decorative wall and roof. In general, different specifications of light steel keel can form different partition wall skeletons. Generally, a wall border is formed along the ground, along the top keel and along the wall, along the pillar keel, and a number of vertical keels are erected in the middle, mainly bearing keels. According to the purpose of use, there are two kinds of ceiling keel and partition keel. According to the sectional form, there are V type, C type, T type, L type keel.
2. Generally speaking, there are several kinds of light steel keel thickness, namely: 100mm, 200mm, and 240mm specifications. The light steel keel is mainly used 75 mm wall keel, plus 2 layers of 12 thick plasterboard is nearly 100 mm thickness. In general, most people choose light steel keels when using paper gypsum ceilings, sloping keels for gypsum boards, and thicker keels for gypsum thick ones.
3, there are some types of light steel keel, need to cross the keel. Vertical keel spacing is mainly determined by the width of the gypsum board. Usually placed on the edge of the gypsum board, one in the board, spacing <600 mm. When the quality of the wall decoration layer, such as tiles, keel spacing <420 mm is appropriate. When the height of the partition wall is increased, the spacing between keels should also be appropriately reduced.
4, under normal circumstances, light steel keel wall specifications can be divided into these types, namely: 75 type wall keel single-sided single-layer closure, thickness is generally 8.45 cm, after the paint, the wall thickness is about 9 centimeters; 75 type wall keel double-sided double seal, thickness is generally 9.40 centimeters, do a good job after painting, the wall thickness is about 10 centimeters. Type 75 wall keel single-sided single-layer closure, the thickness is generally 8.70 cm, after the paint, the wall thickness of about 9 cm.
Light steel wall keel price
1. Generally speaking, the light steel partition wall keel is an economical and affordable wall partition material. Due to the difference in thickness and width, the price will be different. The price is generally between 12-20 yuan/root. Keel specifications are generally 3 meters long, 75 mm, 100 mm and other specifications.
3, a specification for the 2400 * 1200 mm gypsum board, the price is generally between 22-30 yuan, plus accessories and labor costs, the general light steel light steel wall keel decoration prices in 90-150 yuan / Between square meters. According to the shape of the partition wall, the materials used will also be different.
Note: This price is for reference only! Due to geographical differences, of course, the price will be different. For more details on the prices, please refer to the local distributors!
Editor's summary: The thickness of the light steel partition keel is relatively thin, but it does not occupy an area, and the smoothness of the light steel partition keel is good, convenient construction, and the price is not expensive. Therefore, whether in appearance or economic, light steel wall keel is a good choice.
Partition wall keel
Special Flat Washers,Stainless Washers,Thick Washers,Flat Spring Washer DIN
NINGBO YWC IMP. & EXP. CO.,LTD , https://www.nbywc-fastener.com