The foam granulator production line is a professional manufacturer of foamed plastic granules, which can be recycled for waste foam and has been recycled. To make better use of the foam granulator line, you must use it according to certain rules of use:
1. When the foam granulator production line is working, it is necessary to heat the upper and lower cylinders for 20-30 minutes. It is necessary to put a piece of foam on top of the foam granulator head to test whether the production temperature is reached. If the production reaches a certain temperature, it can be started up normally.
2. When the foam granulator production line is working, the filter can be added with one or two layers of filter screen in the lower screw head. It can easily filter out the impurities of waste plastics, and should back up several filters. In order to prevent the filter from being clogged, the production efficiency of the foam granulator is affected. If there are too many impurities in the filter, you should use the fire to remove the impurities on the filter surface to achieve the purpose of illusory use again.
According to a certain production process to complete the foam granulator production, not only can improve the production efficiency of the foam granulator, but also minimize the investment amount and increase the investment profit.
Multifunction Cross Switch Screwdriver,Double Head Screwdriver,Cross Flat Screwdriver,Plastic Handle Screwdriver
Yucheng Weisite Measuring Tools Co., Ltd , https://www.wsttools.com