| Name of product | specification | Materials | Origin | price | Than yesterday | Compared to last week | Than last month |
| Common line | Φ8mm | Q235 | Water Steel | 3500 | 0 | 0 | 190 |
| Common line | Φ8mm | Q235 | Dagang | 3360 | 0 | 0 | 100 |
| altitude | Φ6.5mm | Q235 | Ping Gang | 3420 | 0 | 0 | 50 |
| altitude | Φ6.5mm | Q235 | Heavy steel | 3420 | 0 | 0 | 50 |
| altitude | Φ8mm | Q335 | Wine and Steel | 3390 | 0 | 0 | 20 |
| Rebar | Φ12mm | HRB335 | Water Steel | 3750 | 0 | 50 | 220 |
| Rebar | Φ14mm | HRB335 | Water Steel | 3690 | 0 | 50 | 180 |
| Rebar | Φ16-25mm | HRB335 | Water Steel | 3510 | 0 | 60 | 150 |
| Rebar | Φ16-25mm | HRB335 | Degang | 3470 | 0 | 60 | 160 |
| Grade III rebar | Φ16-25mm | HRB400 | Water Steel | 3560 | 0 | 50 | 140 |
| Grade III rebar | Φ16-25mm | HRB400 | Degang | 3560 | 0 | 50 | 190 |
| Hot rolled plate | 2.75*1250*6000mm | Q235 | Pangang | 4370 | 0 | 0 | 50 |
| Hot rolled plate | 3.0*1250*6000mm | Q235 | Pangang | 4350 | 0 | 0 | 50 |
| Hot rolled plate | 4.75*1250*6000mm | Q235 | Pangang | 4210 | 0 | 0 | 30 |
| Hot rolled plate | 6.0*1250*6000mm | Q235 | Pangang | 4150 | 0 | 0 | 30 |
| Hot rolled plate | 5.5*1500*6000mm | Q235 | Handan Iron and Steel | 4130 | 0 | 0 | 30 |
| Hot rolled plate | 6.0*1250*6000mm | Q235 | Wine and Steel | 4070 | 0 | 0 | 20 |
| Cold rolled plate | 1.0*1000*2000mm | Q195 | Pangang | 5300 | 0 | 0 | 0 |
| Cold rolled plate | 1.2*1000*2000mm | Q195 | Pangang | 5250 | 0 | 0 | 0 |
| Cold rolled plate | 1.5*1000*2000mm | Q195 | Pangang | 5250 | 0 | 0 | 0 |
| Cold rolled plate | 1.0*1250*2500mm | Q195 | Wu Gang | 5350 | 0 | 0 | 0 |
| Cold rolled coil | 1.0*1250*2500mm | Q195 | Kunming Steel | 5130 | 0 | 0 | 0 |
| Puzhong board | 8mm | Q235 | Liu Gang | 4480 | 0 | 0 | 0 |
| Puzhong board | 12-20mm | Q235 | Liu Gang | 4200 | 0 | 0 | 0 |
| Puzhong board | 12-20mm | Q235 | New Steel | 4200 | 0 | 0 | 0 |
| I-beam | 25# | Q235 | Wu Gang | 3730 | 0 | 0 | 0 |
| I-beam | 36# | Q235 | Lai Gang | 3900 | 0 | 0 | 0 |
| Channel steel | 16# | Q235 | Liu Gang | 3370 | 0 | 0 | 0 |
| Channel steel | 25# | Q235 | Heavy steel | 3550 | 0 | 0 | 0 |
| Angle Steel | 50*5mm | Q235 | Kunming Steel | 3320 | 0 | 0 | 0 |
IECEx Approved Coriolis Mass Flow Meter
Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor & Mass Flow Sensor Coriolis, ATEX, IECEx & CE approved.
The meter can be connected with computer as follows. Connect the meter and computer with a USB-to-RS485 converter( converter A+ end to transmitter A+ end, B- to B-, and GND to GDN); turn to device manager of the computer to check COM port connected with meter. Start the software, select the right COM port and click Connect; do not change any other parameters (if you do not know the right one, click Automatic options on the left, click Connect, plug & unplug the transmitter, and then check if it is connected). You can click Connect on the tool bar to disconnect or connect again. It will shown Connected/Not Connected at the bottom of this interface.
The flow direction is settable. There are 4 options, forward(default), reverse, absolute value & bi-direction. There is a direction mark on the sensor. Forward means the same direction with the mark on sensor, the meter will only count the flow in this direction; reverse means the opposite direction of the mark, the meter will only count the reverse direction; bidirectional means that the meter will measure both directions, it increases when it is forward and decreases when reverse; absolute means it increases no matter it is forward or reverse.
Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor, Mass Flow Sensor Coriolis
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com