Wardrobe is an essential furniture product for our bedroom space. There are many types of wardrobe products on the market, and different styles of wardrobe products are installed in different ways. How to install the wardrobe Roman products? Today, we through the wardrobe Roman installation method map related to a look at the installation method of Roman columns wardrobe it!
Wardrobe Roman installation method
Use an edged wardrobe plate of the same size as the Roman column. The plate is fixed to the back of the Roman column with special size screws. Then, the wardrobe plate and the side panels of the wardrobe are kept at the same level. On the side panel of the wardrobe, screws are used to connect the plates on the back of the Roman column, and then Roman columns can be installed.
Matters needing attention: If it is a Roman column of solid wood material, it will be used more often in daily use, and the installation method is mostly made by splicing with 45°. Other styles of Roman columns are also used for this kind of installation and splicing, but if the Roman column is too thick, the 45° splicing method should not be used. The most common Roman column on the market is 5 cm wide and 0.2 cm thick. The length can vary with the installation height.
Wardrobe Roman installation method
It is necessary to set the installed Roman columns horizontally and vertically. According to the size of the Roman column, divide the approximate installation position and mark them. In the installed area, according to the size of the Roman column, wooden keels with a length and breadth of 200 mm are used to determine the approximate position, and the corresponding screws are used for fixing.
Wardrobe Roman installation method
Before fixing the Roman column, if it is a gypsum material, special glue should be used to evenly coat the back of the Roman column. Step by step, slowly screw the length of the screw into the plaster of the Roman column, and then connect the screw on the keel. The screws used in advance need to be painted and put into service for a long time. Oxidation is used. For the sake of beauty, the gaps existing after construction are filled.
The method is summarized as follows: When installing the Roman column, it is necessary to clean up the original installation area in the early stage, no dust, and a smooth surface. If there is a bottom slurry, it needs to be wetted and shoveled clean. When we purchase Roman columns, we need to select the corresponding Roman column product according to the actual situation of our own home. The installation is usually done by a woodworking master through certain horizontal and vertical angles of space, or by using plates on the back of a Roman column, and installing various types of products using a variety of mounting methods such as silk thread installation.
About the installation method of the Roman column in the wardrobe , I will briefly introduce it here, and I hope to help you. If you need to learn more about the contents of wardrobe decoration or you need to know about other decoration, you can pay attention to our website, more exciting content, waiting for you.
Wardrobe wardrobe Roman installation method
Fire Rated Door,Fire Door,Fire Retardant Door,Fire Rated Access Doors
Foshan QI'AN Fireproof Shutter Doors Co., Ltd , https://www.fsqianfiredoor.com