Error demonstration one:
Indoor tasteless immediately stay
The decoration smell that is not overly heavy is only caused by the low temperature in the autumn. This kind of illusion will gradually be exposed with the start of heating in winter. When the indoor temperature rises, various harmful gases will volatilize and become active. The indoor space is completely polluted. The air seriously affects the health of the decoration owner. Therefore, even if there is no taste after the renovation, you must wait for two months to one month to stay again, but also pay attention to the morning and evening window ventilation.
Error demonstration two:
Wall cracking immediately repair
As the weather is dry and the temperature changes frequently, the volatilization of water and the shrinkage of wall materials will cause varying degrees of wall cracks and crevices. These are the normal physical changes of the decorative materials. The cracking of the wall indicates that the water is evaporating and it may continue to volatilize. Even if it is repaired, the wall will continue to crack. In the autumn, you should be careful not to worry about retreat. You should wait until next spring to renovate as necessary.
Error demonstration three:
Air-drying paint or wallpaper
In the summer, when home painting is used to paint or paste wallpapers, doors and windows are generally opened to allow the walls to dry in a short period of time. However, if you open doors and windows in the autumn, because the weather is already dry, the walls will dry faster, and due to the rapid loss of water, there may be shrinkage and deformation. Therefore, you should keep windows and doors closed in the paint or paving wallpaper for 1 to 2 days, or ventilate only in the morning and evening, but always keep the walls dry naturally. In addition to dryness, even wallpaper should be replenished, so before you put it on, you must first soak it in water and then brush it.
Wall construction small apartment decoration 100 square meters decoration window wallpaper interior decoration paint home decoration
Brazing sintered diamond Saw Blade features
1, the diamond edge can be 2/3 of the diamond height, so grinding
Cutting efficiency is high, and is conducive to scouring debris, surface abrasive particles are not easy to cause
Blockage and loss of grinding ability.
2, due to the high edge of diamond, chip tolerance space, diamond and base
The high binding strength between the bodies prevents the diamond from falling off.
3, brazing diamond saw blade is suitable for cutting ceramics, microcrystalline stone, people
Stone, marble, super sharp.
What are the advantages of brazing diamond saw blade
1, high cutting edge rate, cutting efficiency is very high;
2, diamond and matrix chemical combination, in the work is not easy to take off
Fall;
3. High sharpness, straight cutting edge, fast feeding speed and easy feeling;
4, large chip space, surface abrasive is not easy to lose grinding due to blockage
Ability.
If cracks appear on the grinding wheel in the process of use, stop using the grinding wheel immediately and replace the cutting piece with a new one to avoid breaking the cutting piece and injuring others.
Diamond Blade,Stone Circular Saw Blade,Angle Grinder Stone Blade,Electroplated Diamond Cutting Wheel
Henan Jinlun Superhard Material Co., Ltd , https://www.jlsuperhard.com