| Home>Bearing knowledge> Bearing professor describes the device of the oscillating motor imported bearings |
Bearing Professor describes the device for oscillating motor bearings
Source: China Bearing Network Time: 2018-04-18
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
When the oscillating motor is replaced with a new one; it is necessary to use the same bearing as the original type.
1) The bearing is washed with kerosene; press in the bearing seat; fill the shell of the outer ring of the bearing with Shell No. 3 lithium base grease to two-thirds full; apply uniform with the net hand; install the bearing gland; The bolts of the bolt-proof rubber are pressed against the bearing gland.
2) The bearing is a detachable cylindrical roller bearing in the front and back; the bearing should be placed on the rotating shaft and in place.
3) Mount the bearing housing on the casing; if there is a grease oil filling hole; it is necessary to align the bearing. Press the fastening bolt with the anti-loose rubber to press the bearing seat.
4) The painful block in the watch is mounted on the rotating shaft and is in place; if there is an axis key, the axis key should be installed in the keyway and then the external pain block should be installed; the shaft retaining ring is mounted on the rotating shaft.
5) Tightly fix the bite block fastening bolt; change the adjustable bite block; make it reach the position of the viewpoint before the unloading and tighten the fastening bolt. After the above assembly is completed; the shaft should have a certain axial movement,
6) Shield on both ends of the upper oscillating motor; fasten with screws.
The role of imported bearings in the way of oscillating motors and other aspects of the oscillating motor is a necessary change; and the way of thinking from a different point of view also has a certain change; gradually, the situation of various devices has also Must understand.
Recommend to friends comments close window
| Bearing related knowledge |
| Why is KOYO bearing easy to attack noise bearing oil NSK bearing device process bearing ring fine cold heading skills analysis of common shortcomings of heat treatment of bearing parts |
This article links to http://
Please indicate the bearing network http://
Previous:Use and disassembly of magnetic pump bearings Next: Bearing ring super finishing process
Iron Nail,Pure Iron Nails,Iron For Nails,Galvanized Iron Nail
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yuzhengnails.com