Due to the continuous growth in global demand for energy-efficient cooling systems, Iskar will use the double-slot milling cutter for the double-groove machining of the inner tube of the heat exchanger standard tube sheet, which is first introduced to the market in the form of a standard product. Iskar's Transformers series of double-slot milling cutters not only increase productivity by more than four times , but also increase tool life by 66% compared to competitors when machining standard tube-and-tube grooves , and eliminate chattering during processing.
In the near future a 316L Stainless Steel Plate 412 ¾ "standard hole machining cases, this tool 35 minutes to complete the processing of all the success, far better original 137 minutes per head qualified machining six parts, The previously used tool can only process 3.64 workpieces; in addition, the downtime for tool change is reduced from the original 5 minutes to 30 seconds, and no burrs need to be repaired after this process.
In order to make the tool meet more standards and mainstream applications, the standard milling cutter is designed in three sizes, diameters 15.5, 18.5, 24.5 mm (.610, .728 and .965") , corresponding to a machining aperture standard of 5 /8, 3â„4 and 1" tube sheets. The standard milling cutter has a radial depth of cut of 3 mm (1/8") and a maximum longitudinal depth of cut of 45 mm (0.018") .
The cutter head is rigidly clamped in the T -type threaded cutter of the Iskar Transformer end mill with anti-vibration and noise reduction design. The T -threaded interface ensures repeatable positioning accuracy when replacing the cutter head. The standard cutter head and the cutter bar ensure fast delivery.
Pipe Black Pipe,Black Pipe,Iron Pipe
Xinpengyuan Metal Manufacturing Co., Ltd , http://www.lc-steelpipe.com