- Model NO.: coating pipe
- Technique: Smls/ERW/LSAW/SSAW
- Surface Treatment: 3lpe
- Section Shape: Round
- Thickness: 3.05 - 59.54 mm
- Material for Pipe: API 5L Gr.B/X42-X80
- Trademark: Derbo
- Specification: SGS
- Type: Seamless/Welded
- Material: Carbon Steel
- Usage: Pipeline Transport, Oil/Gas Drilling, Machinery Industry, Chemical Industry
- Outer Diameter: 88.9 - 2020 mm
- Pipe Ends: Plain\Beveled
- Length: SRL/DRL
- Transport Package: Regular Packing or Buyers′ Requirement
- Origin: China
Pipe Details
Â
| Standard | APIÂ 5L | ||
| Grade | PSL-1 | APIÂ 5LÂ -Â Gr.B/X42/X46/X52/X60/X70Â etc. | |
| (Â Material) | PSL-2 | ISO3183Â -Â L245/L290/L320/L360/L415/L485Â etc. | |
| Minimum Order Quantity | 1 Ton | ||
|     Outside Diameter Ranges | PSL-1 | 0.405-80(in) or 10.3mm-2032mm | |
| PSL-2 | 4 1/2 -80(in) or 114.3mm-2032mm | ||
|           Wall Thickness Ranges | SCH10~SCH160  Or  STD,XS,XXS  Or  1.73mm~59.54mm | ||
| Length | For 20Ft Container | 4.8m-5.8m | |
| (negotiable) | For 40Ft Container | 4.8m-12m | |
|  |       Most common choice | 6m, 12m | |
| Type | Welded | ERW,LSAW/SSAW | |
| Seamless | Cold Drawn,Hot Finished,Hot Expanded | ||
| Cap (negotiable) | Pipe size should under DN600 | ||
| Pipe End | Plain end | All sizes | |
| Bevel end | Pipe size above DN50, and the thickness should greater than 3.2mm | ||
| Our advantages | ·Diverse products(Steel pipes, pipe fittings, other fittings) | ||
| ·Any third party inspection is accepted by we company. | |||
| ·Quick response in quotation,delivery,after-service. | |||
| ·Focus on pipe & tube solution for project application. | |||
Coating Details
Â
| Nominal size of Pipe | Minimum thickness of normal coating in mm |
| Up to DN100 | 1.8 |
| Over DN100 up to DN250 | 2.0 |
| Over DN250 to below DN500 | 2.2 |
| From DN500 to below DN800 | 2.5 |
| From DN800 | 3.0 |
The minimum coating thickness shall be 0.7mm greater ('reinforced' type) where coatings will be subjected to particularly high mechanical stress.
Products Show
Company Introduction
Please do not hesitate to contact me if you have any queires on our products !
Â
We will offer our warm-hearted service to you !Â
Plastic are material consisting of any of a wide range of synthetic or semi-synthetic organic compounds that are malleable and so can be molded into solid objects.
Plasticity is the general property of all materials which can deform irreversibly without breaking but, in the class of moldable polymers, this occurs to such a degree that their actual name derives from this specific ability.
Rubber Plastic Products are typically organic polymers of high molecular mass and often contain other substances. They are usually synthetic, most commonly derived from petrochemicals, however, an array of variants are made from renewable materials such as polylactic acid from corn or cellulosics from cotton linters.
Rubber Plastic Products
Plastic Gear,Plastic Wheel,Plastic Seals,Plastic Wear Ring
Zhejiang Dream Industry Limited , http://www.mlwdream.com