ã€China Aluminum Industry Network】Aluminum is divided into raw aluminum and mature aluminum. Raw aluminum is less than 98% aluminum. Its properties are relatively brittle and can only be found in foundry commodities. Ripe aluminum is more than 98% aluminum, which is soft and can be calendered. A variety of utensils are rolled.
Defective aluminum profile features:
1. The chemical composition is unqualified. The cost of doping a lot of aluminum and aluminum scraps in commodities is greatly reduced. However, the chemical composition of aluminum profiles will be unqualified, which will seriously endanger the safety of the construction project.
2, the number of aluminum cut off the closure of many times, reducing the loss of chemical reagents, the cost down, but the profile of corrosion resistance is also greatly reduced.
3, thin oxide film thickness. National standard rules for the construction of aluminum oxide film thickness should not be less than 10um (micron). The thickness is not enough, the appearance of aluminum is easy to rust and corrosion. Sampling inspection of some no name, site, production license, certification of aluminum profiles, the oxide film thickness is only 2 to 4um, and some or even no oxide film. According to the expert's budget, if the thickness of oxide film is reduced by 1um, the cost of electricity consumption per ton of profile can be reduced by more than 150 yuan.
4, chemical composition is not qualified. The incorporation of a lot of aluminum and aluminum scrap aluminum can greatly reduce the cost, but it will cause the failure of the chemical composition of aluminum profiles, seriously jeopardizing the safety of the construction project.
Unqualified aluminum profiles will cause deformation of aluminum profiles due to air, rain, and sunlight, and even appearance of glass cracks, drop, etc.
Product introduction
HHCMS-220 Carbon Molecular Sieve
The HHCMS-220 is a new nonpolar adsorbent designed to extract nitrogen-rich gas from air. It is suitable for separating nitrogen from air. It has a high adsorption capacity for oxygen and can separate nitrogen from air.
The most notable features of the carbon molecular sieve are high gas-producing efficiency and low energy consumption, especially for the preparation of nitrogen with a purity of less than 99.5% to 99.9%.
It is widely used in large air separation nitrogen equipment, and its application fields include coal mine, ship, oil storage and transportation.
Project parameters
Project parameters
The diameter of:1.0-1.3 1.3-1.5
Packing density:≥660kg/m³
The intensity of particle:≥95
Compressive strength abrasion:≤1%
The moisture content:≤0.5%
Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel
The adsorption time of test condition was 58s with an average pressure of 1-2s
|
Adsorption pressure |
Nitrogen purity (%) |
Yield (Nm3/ h.t.) |
Nitrogen recovery rate |
|
0.8MPa |
99.99 |
80 |
23 |
|
99.9 |
150 |
30 |
|
|
99.5 |
220 |
36 |
|
|
99 |
310 |
42 |
|
|
98 |
370 |
45 |
|
|
97 |
450 |
47 |
|
|
96 |
520 |
50 |
|
|
95 |
580 |
55 |
|
|
0.6MPa |
99.99 |
64 |
24 |
|
99.9 |
110 |
32 |
|
|
99.5 |
180 |
37 |
|
|
99 |
245 |
43 |
|
|
98 |
300 |
46 |
|
|
97 |
360 |
48 |
|
|
96 |
410 |
52 |
|
|
95 |
465 |
56 |
Pay attention to
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;
Molecular Sieves Hhcms-220,Molecular Sieve Dehydration,Molecular Sieve Activation,Hhcms Molecular Sieve
Zhejiang Changxing Haihua Chemical Co.,Ltd. , https://www.zjcxhhcms.com