One, how to put out the first fire?
Timely and effective fire fighting at the beginning of the fire can prevent small fires from causing catastrophes.
1. Before the fire truck arrives at the scene, it should try to put out a fire. Do not blindly open doors and windows to avoid air convection and cause the fire to spread.
2. The fire extinguishing seedlings can be obtained from local materials, such as fire extinguishers or using simple materials such as sand, blankets, and quilts to cover the flame to extinguish the fire.
3. Promptly organize personnel to use water basins, buckets, etc. to pass water to extinguish the fire, or use the wall fire hydrant on the floor to extinguish the water.
4. If the pan is on fire, the fire in the pan should not be poured with water. The fire should be extinguished immediately, and the lid should be quickly covered or the cut vegetables should be used to extinguish the fire.
5. If the gas cooker catches fire, try to close the valve or cover it with water under clothing, quilt, etc. to extinguish the fire, and quickly close the main valve.
6. Combustible materials near the fire should be moved to a safe place in time.
7. If the household appliance catches fire, cut off the power first and then put out the fire. In addition to cutting off the power, pay attention to using blankets and blankets to extinguish the fire. People should stand on the side to prevent the picture tube from bursting and hurting people.
Second, what should I do if there is a fire in the computer of the internet cafe?
In recent years, the Internet cafe industry has developed rapidly. Many computers in Internet cafes have been operating for a long time, which may easily cause fires. Due to the large number of Internet cafes, if a fire occurs, it may cause casualties. Here are some tips for Internet cafe owners: when the computer starts to smoke or catch fire, immediately unplug or turn off the main switch, and then cover the computer with a wet carpet or quilt, etc., which can not only prevent the spread of fireworks, but also block the glass of the fluorescent screen Debris. Do not splash water on the fired computer, even if the computer is turned off, because the sudden drop in temperature will burst the hot picture tube, in addition, there is still residual current in the computer, splashing water may cause electric shock. Do not lift the cover to watch. When extinguishing the fire, in order to prevent the picture tube from exploding and injuring people, only approach the computer from the side or the back. At the same time, Internet cafe employees quickly organized personnel evacuation to avoid casualties.
3. How to call the police?
Calling an alarm phone sounds very easy. In fact, during the process of receiving an alarm from the fire department, many alarm persons have trouble putting out fires because they cannot call the police correctly. The fire department often receives this alarm call: "Is the fire brigade? It's on fire, come on." In fact, such an alarm is not correct. The alarm did not make it clear where the fire was or what material was on fire, so that the fire department could not quickly mobilize personnel to the fire. The correct way to call the police is to calm down when calling the police, to explain the specific location and unit of the fire, what items are on fire, what the fire is, the phone number used, and send someone to the main intersection to meet the fire truck.
Synthetic Single Crystal Diamond (SSCD) Semi-finished Dies
BOHONG SSCD Semi-Finished Dies are based on SSCD raw materials and are designed according to customer's hole requirements to achieve customer's quality standards for semi-finished products.
Feature:
-High surface finish.
-Reduces production processing cost and saves labor for customers.
SSCD dies are an ideal choice for the manufacture of fine wire and ultra-fine drawn wire.For each die, single crystal diamond dies have excellent quality, hardness, precision and longevity.
Dies Type:Semi finished ND Wire Drawing DIES
Available sizes:Can be customized according to client needs
Product application:mainly used in Wire with high requirement of finishing such as copper wire microfilament, enameled wire, multi drawing copper wire, tinning wire, etc.
BOHONG wire-drawing die blanks have excellent toughness, and high thermal conductivity, wear resistance and hardness. They are used to make wire from copper, aluminum, stainless steel and other alloy materials. Their service life is 100 to 300 times longer than that of the old-fashioned hard alloy wire-drawing dies. Wire drawn with diamond dies is very consistent, and fine in finish.
Carat Price Synthetic Diamond Micro Powder,High-Pressure Suspension Micro-Powder Mill,High-Pressure Micro-Powder Grinder,Sscdiamond Dies Of Wire Drawing
Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com