Wasteland cleaning knowledge
(a) The tools used:
Large-scale vacuum suction machine, multi-functional grazing machine, glass set tools, extension rods, ladders, buckets, rakes, marble blade, scraper, waterer and so on.
(b) The used medicaments:
All-around cleaners, glass cleaners, ceramic tile cleaners, ceramic cleaners, gel removers, stain removers, acid cleaners, toilet cleaners, stainless steel cleaners, stainless steel brighteners, furniture waxes, etc.
(c) Wasteland procedures:
Land reclamation is the first of the clean projects. As a result of the construction projects often leaving behind a lot of garbage and dirt, all kinds of ground stones, there will be left behind on the walls of cement blocks, paint, glass glue, water pollution, rust, etc., all of which must be in the land reclamation work. It is clean, so it is one of the most difficult, most complicated and most arduous work. The quality of land reclamation works directly affects the quality and grade of future cleaning work. Therefore, there are very important requirements for good land reclamation.
The specific process is as follows:
1, first clean up the decoration debris left on the scene.
2, from top to bottom vacuum.
3, wiping glass: wipe the glass frame with a towel first, then use a water dispenser to dilute the diluted glass solution, evenly smear the glass from top to bottom, stubborn stains with a blade to clean, and then repeat the above process Scraping from top to bottom with a scraper, wipe the water marks on the frame with a dry towel, and wipe the clean water marks on the glass with the machine skin.
4, bathroom: adhere to the principle of the top down, first recognize the material of the bathroom top, PVC or aluminum plate or paint, and then according to different materials with different cleaning methods for cleaning; with a clean ball or It is a wall-cleaning brush for cleaning the bathroom wall, focusing on the cracks in the tiles, and the traces, paint spots, and cement stains left on the surface of the tiles; cleaning the toilet's sanitary ware with a towel, cleaning the faucets and fittings with a stainless steel cleaning solution; The ground machine carries out the final cleaning on the ground. From the corners of the ground, it uses a clean ball and a blade to carry out targeted decontamination and cement stain removal on the corners that are not washed by the floor washing machine; finally, after the inspection, there are no omissions. Then use a dry towel to wipe the pipe and other fittings.
5, kitchen: The procedure is the same as above. Note: Due to the large number of stainless steel fittings in the kitchen, it should be the focus of cleaning.
6. Bedrooms and halls: The walls are cleaned with dusters or vacuum cleaners, wipe lamps, switch boxes, exhaust vents, air conditioning vents, exhaust vents, etc.
7. Doors and frames: Distinguish the material of the door, dilute it with professional detergent, wipe with a towel, the procedure is from top to bottom, fold the towel into a box, start from the top of the door and wipe from left to right, there can be no omission Glue spots can be used in addition to glue treatment; box procedures with the door; must be done without omissions, no dead ends.
8, floor cleaning: After all done, that is, the ground cleaning, the ground should also be divided into material, is a wooden floor, or ceramic tile, or stone, when the separation after the selection of special detergent diluted, began Cleaning. The glue stains on the ground can be removed with blades, and stubborn glue removal agents can be used. After the last process is finished, the foreman must fully inspect it and confirm that there is no leftover and then leave the scene.
9, the angle line: wipe with a towel, with a blade to remove all kinds of plastic traces, paint points and so on.
(d) Acceptance criteria:
Glass standard: visually no traces, no fingerprints, no stains, bright and clean.
Bathroom standards: no color difference in the wall, no obvious stains, no paint spots, no glue traces, clean and bright sanitary ware, stainless steel pipe fittings are bright and clean, no dead corner, no missing, no odor.
Kitchen standard: The wall has no color difference, no obvious stains, no paint spots, no glue traces, stainless steel pipe parts are bright and clean, and the ground has no dead ends and no omissions.
Bedroom and hall standards: The walls are free from dust, the lamps are clean, the switch box is clean and there are no glue stains, and the air outlets and air-conditioning outlets are free of dust and glue spots.
Door and frame standard: No glue stains, no paint spots, smooth touch, shiny, no dust on the door edge.
The standard of the ground: Wooden floor is free from glue stains and cleanliness; tiles are free of dust, no paint, no cement, shiny; stone has no stains, no glue spots, high gloss.
Wasteland cleaning glass stainless steel coating cement paint floor tile glass brick glass door kitchen glass sliding door bathroom tile bathroom door tile adhesive bedroom lamp floor tile kitchen tile bedroom lamp
Insect Killer Tube,T8 Bl Tube,T8 Bl Lamp,T8 Bl Bulb
Changxing leboom lighting product CO.Ltd. , https://www.leboomuvd.com